Start the BIOS-Update - Flash your BIOS chip Choose BIOS-Update method - DOS, Windows or per BIOS-Setup?ģ. Preparation - Create a safe environment for a BIOS-UpdateĢ. Your PC should work with these basic (optimized) factory settings - otherwise you have to change some special settings (CPU, FSB, Boot sequence, etc.).ĭid you get a blank screen and nothing happens? Then read on.
#Insyde bios update f.01u hp how to
So, please take a look into the mainboard manual how to reset the CMOS! Many mainboard manufacturers are advising to first shut down the PC and then to reset the CMOS (not on notebooks!).Example: "afudos /H".Īfter the flashtool has successfully updated your BIOS, it normally should display a short message like "100% OK, please restart the PC", but we still have to do some things before restarting the PC: Some flashtools are showing some more parameters/infos if you start the flashtool with one of these parameters: /? or /H.If you start the flashtool without any parameters, the tool should display some parameters/infos how to start the update, or it shows a menue with input boxes to insert the bios filename etc.In this case start the flashtool without any parameters. It could also be that your flashtool requires some different parameters. If the flashtool reports an error (like "invalid parameter") then check the right spelling of the command line.
#Insyde bios update f.01u hp archive
Read the info and readme text files, which are most often available in the download section, or inside the compressed archive files which contains the flashtool and BIOS file.Take a look into your mainboard manual under the section BIOS Update.Open your eyes, start your brain, power off vacuum cleaners and other troublemakers, and take off: With cd test you can open a sub-folder named test. If you want to change the drive, you have to insert the drive letter e.g. All rights reserved.ĭOS-Tips: the DOS-Prompt A:\> indicates that the current drive letter is A.
0 kommentar(er)
